Operation Manual – LoginH3C S7500E Series Ethernet Switches Chapter 4 Logging In Using Modem4-1Chapter 4 Logging In Using ModemWhen logging in using modem, go to these sections for information you are interestedin:z Introductionz Configuration on the Administrator Sidez Configuration on the Switch Sidez Modem Connection Establishmentz Modem Attribute Configuration4.1 IntroductionYou may log in your switch from its console port from a remote device across a PSTNwith a pair of modems in between. When your switching network fails, this allows you toremotely configure your switch, retrieve logs and warning messages, and locate theproblem.To log into your switch in this way, you need to configure the terminal and the switchproperly, as listed in the following table.Table 4-1 Requirements for logging into a switch using a modemItem RequirementThe PC can communicate with the modem connected to it.The modem is properly connected to PSTN.AdministratorsideThe telephone number of the switch side is available.The modem is connected to the Console port of the switchproperly.The modem is properly configured.The modem is properly connected to PSTN and a telephone set.Switch sideThe authentication mode and other related settings areconfigured on the switch. Refer to Table 2-3.4.2 Configuration on the Administrator SideThe PC can communicate with the modem connected to it. The modem is properlyconnected to PSTN. And the telephone number of the switch side is available.
