H3C S7500E Series Operation Manual

Also see for H3C S7500E Series: Installation manual Command manual Installation manual Configuration guide Configuration guide

Contents

H3C S7500E Series Operation Manual Manual pdf 998 page image

Operation Manual – ACLH3C S7500E Series Ethernet Switches Chapter 3 IPv6 ACL Configuration3-63.5 Displaying and Maintaining IPv6 ACLsTo do… Use the command… RemarksDisplay information abouta specified or all IPv6ACLsdisplay acl ipv6 { acl6-number |all | name acl6-name }Available in anyviewDisplay information aboutACL uses of a switchdisplay acl resource [ slotslot-id ]Available in anyviewDisplay the configurationand status on time rangedisplay time-range { time-name| all }Available in anyviewClear statistics about aspecified or all IPv6 ACLsthat are referenced byupper layer softwarereset acl ipv6 counter{ acl6-number | all | nameacl6-name }Available in userview3.6 IPv6 ACL Configuration Example3.6.1 Network RequirementsAs shown in Figure 3-1, a company interconnects its departments through the switch.Configure an ACL to deny access of the R&D department to external networks.3.6.2 Network DiagramFigure 3-1 Network diagram for IPv6 ACL configuration3.6.3 Configuration Procedure# Create an IPv6 ACL 2000. system-view[Switch] acl ipv6 number 2000[Switch-acl6-basic-2000] rule deny source 4050::9000/120[Switch-acl6-basic-2000] quit