Operation Manual – IPv6 RoutingH3C S7500E Series Ethernet Switches Chapter 3 IPv6 OSPFv3 Configuration3-18Type : I Cost : 1NextHop : directly-connected Interface: Vlan400*Destination: 2001:3::/64Type : IA Cost : 4NextHop : FE80::F40D:0:93D0:1 Interface: Vlan4004) Configure Area 2 as a totally stub area# Configure Switch C, the ABR, to make Area 2 as a totally stub area.[SwitchC-ospfv3-1-area-0.0.0.2] stub no-summary# Display OSPFv3 routing table information on Switch D. You can find route entries arereduced. All non direct routes are removed except the default route.[SwitchD] display ospfv3 routingE1 - Type 1 external route, IA - Inter area route, I - Intra area routeE2 - Type 2 external route, * - Seleted routeOSPFv3 Router with ID (4.4.4.4) (Process 1)------------------------------------------------------------------------*Destination: ::/0Type : IA Cost : 11NextHop : FE80::F40D:0:93D0:1 Interface: Vlan400*Destination: 2001:2::/64Type : I Cost : 1NextHop : directly-connected Interface: Vlan4003.8.2 Configuring OSPFv3 DR ElectionI. Network requirementsIn the following figure:z The priority of Switch A is 100, the highest priority on the network, so it will be theDR.z The priority of Switch C is 2, the second highest priority on the network, so it will bethe BDR.z The priority of Switch B is 0, so it cannot become the DR.z RouterD has the default priority 1.
