H3C S7500E Series Operation Manual

Also see for H3C S7500E Series: Installation manual Command manual Installation manual Configuration guide Configuration guide

Contents

H3C S7500E Series Operation Manual Manual pdf 348 page image

Operation Manual – IPv4 RoutingH3C S7500E Series Ethernet Switches Chapter 3 OSPF Configuration3-51[SwitchC] ospf[SwitchC-ospf-1] import-route static[SwitchC-ospf-1] quit# Display OSPF routing information on Switch D.[SwitchD-ospf-1] display ospf routingOSPF Process 1 with Router ID 10.5.1.1Routing TablesRouting for NetworkDestination Cost Type NextHop AdvRouter Area10.2.1.0/24 22 Inter 10.3.1.1 10.3.1.1 0.0.0.210.3.1.0/24 10 Transit 10.3.1.2 10.3.1.1 0.0.0.210.4.1.0/24 25 Inter 10.3.1.1 10.3.1.1 0.0.0.210.5.1.0/24 10 Stub 10.5.1.1 10.5.1.1 0.0.0.210.1.1.0/24 12 Inter 10.3.1.1 10.3.1.1 0.0.0.2Routing for ASEsDestination Cost Type Tag NextHop AdvRouter3.1.3.0/24 1 Type2 1 10.3.1.1 10.2.1.1Total Nets: 6Intra Area: 2 Inter Area: 3 ASE: 1 NSSA: 0Note:You can see on Switch D an external route imported from the NSSA area.3.9.4 Configuring OSPF DR ElectionI. Network requirementsz In the following figure, OSPF Switches A, B, C and D reside on the same networksegment.z It is required to configure Switch A as the DR, and configure Switch C as the BDR.