Operation Manual – IPv6 RoutingH3C S7500E Series Ethernet Switches Chapter 4 IPv6 IS-IS Configuration4-4Note:The ipv6 filter-policy export command, usually used in combination with the ipv6import-route command, filters redistributed routes when advertising them to otherrouters. If no protocol is specified, routes redistributed from all routing protocols arefiltered before advertisement. If a protocol is specified, only routes redistributed fromthe routing protocol are filtered for advertisement.4.4 Displaying and Maintaining IPv6 IS-ISTo do... Use the command... RemarksDisplay brief IPv6 IS-ISinformation display isis brief Available in anyviewDisplay the status of thedebug switchesdisplay isis debug-switchesprocess-idAvailable in anyviewDisplay IS-IS enabledinterface informationdisplay isis interface[ verbose ] process-idAvailable in anyviewDisplay IS-IS licenseinformation display isis license Available in anyviewDisplay LSDB informationdisplay isis lsdb [ [ l1 | l2 |level-1 | level-2 ] | [ [ lsp-idlsp-id | lsp-name lspname |local ] | verbose ] * ] *[ process-id ]Available in anyviewDisplay IS-IS mesh groupinformationdisplay isis mesh-group[ process-id ]Available in anyviewDisplay the mapping tablebetween the host nameand system IDdisplay isis name-table[ process-id ]Available in anyviewDisplay IS-IS neighborinformationdisplay isis peer [ verbose ][ process-id ]Available in anyviewDisplay IPv6 IS-IS routinginformationdisplay isis route ipv6[ [ level-1 | level-2 ] | verbose ]* [ process-id ]Available in anyviewDisplay SPF loginformationdisplay isis spf-log[ process-id ]Available in anyviewDisplay the statistics ofthe IS-IS processdisplay isis statistics [ level-1| level-2 | level-1-2 ][ process-id ]Available in anyviewClear all IS-IS datastructure information reset isis all [ process-id ] Available in userview
