Operation Manual – Information CenterH3C S7500E Series Ethernet Switches Chapter 1 Information Center Configuration1-161.3 Displaying and Maintaining Information CenterTo do… Use the command… RemarksDisplay channelinformation for a specifiedchanneldisplay channel[ channel-number |channel-name ]Available in any viewDisplay the configurationson each outputdestinationdisplay info-center Available in any viewDisplay the state of the logbuffer and the loginformation recordeddisplay logbuffer [ levelseverity | size buffersize |slot slotnum ] * [ | { begin| exclude | include } text ]Available in any viewDisplay a summary of thelog bufferdisplay logbuffersummary [ level severity| slot slotnum ] *Available in any viewDisplay the content of thelog file buffer display logfile buffer Available in any viewDisplay the configurationof the log file display logfile summary Available in any viewDisplay the state of thetrap buffer and the trapinformation recordeddisplay trapbuffer [ sizebuffersize ] Available in any viewReset the log buffer reset logbuffer Available in user viewReset the trap buffer reset trapbuffer Available in user view1.4 Information Center Configuration Examples1.4.1 Outputting Log Information to a Unix Log HostI. Network requirementsz Send log information to a Unix log host with an IP address of 1.2.0.1/16;z Log information with severity higher than informational will be output to the loghost;z The source modules are ARP and IP.II. Network diagramFigure 1-1 Network diagram for outputting log information to a Unix log host
