Operation Manual – DNSH3C S7500E Series Ethernet Switches Chapter 1 DNS Configuration1-61.4 Displaying and Maintaining DNSTo do… Use the command… RemarksDisplay the static domain nameresolution table display ip hostDisplay DNS server information display dns server [ dynamic ]Available inany viewDisplay domain name suffixes display dns domain [ dynamic ]Display the information of thedynamic domain name cache display dns dynamic-hostDisplay the DNS proxy table display dns proxy tableAvailable inany viewClear the information of thedynamic domain name cache reset dns dynamic-host Available inuser view1.5 DNS Configuration Examples1.5.1 Static Domain Name Resolution Configuration ExampleI. Network requirementsSwitch uses the static domain name resolution to access Host with IP address 10.1.1.2through domain name host.com.II. Network diagramFigure 1-3 Network diagram for static domain name resolutionIII. Configuration procedure# Configure a mapping between host name host.com and IP address 10.1.1.2. system-view[Sysname] ip host host.com 10.1.1.2# Execute the ping host.com command to verify that the Switch can use the staticdomain name resolution to get the IP address 10.1.1.2 corresponding to host.com.[Sysname] ping host.comPING host.com (10.1.1.2):56 data bytes, press CTRL_C to breakReply from 10.1.1.2: bytes=56 Sequence=1 ttl=128 time=2 msReply from 10.1.1.2: bytes=56 Sequence=2 ttl=128 time=2 ms
