Table 1. Service Processor Checkpoints. (continued)Checkpoint Description Action/ Possible Failing FRUE070 Configuring modem 1. Try another modem configurationfrom the service processor menus.2. Check the cabling between themodem and the system unit.3. Replace the modem.4. Replace the system board.Location: P1(See note 3 on page 109.)E072 Preparing to call home 1. Try another modem configurationfrom the service processor menus.2. Check the cabling between themodem and the system unit.3. Replace the modem.4. Replace the system board.Location: P1(See note 3 on page 109.)E075 Service processor menus are available This code is posted on the operatorpanel when the service processormenus are available; the system is instand-by waiting for user input.If the service processor menus are notdisplayed on the ASCII terminal:1. Verify that the ASCII terminal isfunctional. Check the cable betweenthe ASCII terminal and the serialport on the system.2. Remove, then reapply AC power.The service processor settings(modem speeds and call-outnumbers, for example) may have tobe reentered.3. Replace the system board.Location: P1(See note 3 on page 109.)E076 Leaving service processor menus;attempting to disconnect modems1. Try another modem configurationfrom the service processor menus.2. Check the cabling between themodem and the system unit.3. Replace the modem.4. Replace the system board.Location: P1(See note 3 on page 109.)Chapter 4. Checkpoints 85
