Memory Card and Memory DIMMsThe following procedures cover removal and replacement of the memory card andmemory DIMMs.Before performing these procedures, read “Handling Static-Sensitive Devices” onpage 248.Memory Card Removal1. If you have not already done so, shut down the system as described in “Stoppingthe System” on page 248.2. If you have not already done so, unplug the system power cables from the electricaloutlet.3. If you have not already done so, remove the service access cover as described in“Service Access Cover” on page 251.4. Remove the processor and memory card cover as described in “Processor andMemory Card Cover” on page 254.5. The memory card is secured in place with retention latches, one on each end of thecard. Open the retention latches.256 Service Guide
