CEC CageThe following procedures cover removal and replacement of the CEC cage.Removal1. If you have not already done so, shut down the system as described in “Stoppingthe System” on page 248.2. If you have not already done so, unplug the system power cables from the electricaloutlets.3. If you have not already done so, remove the service access cover as described in“Service Access Cover” on page 251.4. Remove the processor and memory card cover as described in “Processor andMemory Card Cover” on page 254.5. Remove the processor cards as described in “Processor Card” on page 263.6. Remove the memory card as described in “Memory Card and Memory DIMMs” onpage 256.7. Remove the screws (6) and remove the CEC cage from the system board.ReplacementReplace in reverse order.Chapter 9. Removal and Replacement Procedures 255
