Set AddressThe Set Address icon allows you to define addresses from which your systemunit can receive RIPL code.Client AddrRemote IPL SetupExit000.000.000.000000.000.000.000000.000.000.000Gateway AddrServer AddrSubnet MaskSave255.255.255.000If any of the addresses is incomplete or contains a number other than 0 to 255, an errormessage displays when you select the Save icon. To clear this error, correct theaddress and select Save again.Attention: If the client system and the server are on the same subnet, set thegateway IP address to [0.0.0.0].To change an address, press the backspace key on the highlighted address until theold address is completely deleted. Then type the new address.Chapter 8. Using System Management Services 227
