Table 2. Firmware Checkpoints. (continued)Checkpoint Description Action/ Possible Failing FRUE1D0 Create PCI SCSI node. 1. If a location code is associated withthe checkpoint:v Replace the FRU identified by thelocation codev Replace, one at a time, the otherPCI adapter cards on the samePCI bus. See “Bus SRN to FRUReference Table” on page 171.v Go to MAP 1540: MinimumConfiguration, “Step 1540-24” onpage 77.2. If no location code is associatedwith the checkpoint, go to MAP1540: Minimum Configuration, “Step1540-24” on page 77.E1D3 Create SCSI block device node. 1. If a location code is associated withthe checkpoint:v Replace the FRU identified by thelocation codev Replace, one at a time, the otherPCI adapter cards on the samePCI bus. See “Bus SRN to FRUReference Table” on page 171.v Go to MAP 1540: MinimumConfiguration, “Step 1540-24” onpage 77.2. If no location code is associatedwith the checkpoint, go to MAP1540: Minimum Configuration, “Step1540-24” on page 77.E1D4 Create SCSI byte device node (ST). 1. If a location code is associated withthe checkpoint:v Replace the FRU identified by thelocation codev Replace, one at a time, the otherPCI adapter cards on the samePCI bus. See “Bus SRN to FRUReference Table” on page 171.v Go to MAP 1540: MinimumConfiguration, “Step 1540-24” onpage 77.2. If no location code is associatedwith the checkpoint, go to MAP1540: Minimum Configuration, “Step1540-24” on page 77.98 Service Guide
