- 17 / 79 -LANGEREMV-TechnikDE-01728 Bannewitzmail@langer-emv.dewww.langer-emv.de FLS 106 IC set / FLS 106 PCB setRisks if Not Used for Its Intended Purpose5.2Incorrect use of the FLS 106 scanner may put the user at risk, damage the scanner and/or thetechnical equipment connected to the scanner.Examples of improper use that may put persons/equipment at risk:- Safety devices are bypassed or rendered ineffective.- The FLS 106 scanner is used in a defective state.- The FLS 106 scanner is used outside the specified range of technical parameters.- The field of application is changed by modifications to the design.Claims due to the scanner's abnormal use are excluded!Safety Instructions5.3Risks cannot be totally excluded even if the FLS 106 scanner is used for its intended purpose.Observe the safety information and hazard warnings listed below to prevent damage to propertyand personal injury. Also observe the operating and safety instructions for all other devices used inthe measurement set-up.Carry out a visual check before performing a measurement with a product fromLanger EMV-Technik GmbH. Replace any damaged connecting cables, attachments and probes.Please contact Langer EMV-Technik GmbH if damaged parts need to be replaced or repaired.Wear tight-fitting clothes when using the scanner.Hazard Due to Electrical Voltage5.3.1Your life is at risk if you touch damaged electrical cables.Important: Always check any attachments, measuring devices, cables and probes before using thescanner. Never use any damaged or defective devices.Do not connect or disconnect any cables whilst the FLS 106 scanner is in operation.Only staff from Langer EMV-Technik GmbH may open the scanner and work on the electricalcomponents and electrical lines.Switch the device off immediately, disconnect the mains plug and contact Langer EMV-TechnikGmbH if you detect any damaged insulation on lines, cables or electric components!
