- 71 / 79 -LANGEREMV-TechnikDE-01728 Bannewitzmail@langer-emv.dewww.langer-emv.de FLS 106 IC set / FLS 106 PCB setFigure 107: RF measuring cable connected to the pre-amplifierFigure 108: Pre-amplifier power supply cable in theconnected stateCollision Control for the Near-Field Probe18.3The collision control has to be activated in the ChipScan-Scanner software by ticking the"Depth Test" checkbox.The probe moves up with the magnetic holder if the probe touches an obstacle when movingdown. The scanner recognises this displacement and stops the movement.The ChipScan-Scanner software uses this mechanism to carry out the "Volume with verticalcollision detection" motion strategy. Please refer to section 5.1.3 of the ChipScan-Scannersoftware user manual for further information.
