- 7 / 79 -LANGEREMV-TechnikDE-01728 Bannewitzmail@langer-emv.dewww.langer-emv.de FLS 106 IC set / FLS 106 PCB setGeneral Remarks2User Manual2.1This user manual enables the safe and efficient use of the FLS 106 scanner. It must be kept withthe scanner so that it is accessible for the user.Reading and Understanding the User Manual2.2Read the user manual carefully, observe the safety information (section 5.3) and follow theinstructions given in this manual before putting the device into service.Local Safety and Accident Prevention Regulations2.3The local accident prevention and general safety regulations also apply to ensure that the FLS 106scanner is used for its intended purpose.Images2.4Figures have been included in this user manual to assist the reader's understanding but may differfrom the device's actual version.Limitation of Liability2.5In the following cases, Langer EMV-Technik GmbH can assume no liability for damage to propertyand personal injury if:- The information given in this user manual has not been observed.- The FLS 106 scanner was operated by staff not qualified in the field of EMC.- The FLS 106 scanner was subjected to unauthorised modifications or technical changes.- The FLS 106 scanner was not used according to its intended purpose.- Spare parts or accessories were used that had not been approved by EMV-Technik GmbH.The actual scope of delivery may deviate from the illustrations and texts in this user manual due tothe customisation of orders or due to technical changes and innovations.Errors and Omissions2.6The information in this manual has been carefully checked and is believed to be accurate;however, the Langer EMV-Technik GmbH assumes no responsibility for any clerical, typographical,or proofreading errors, or omissions.Copyright2.7The content of this user manual is protected by copyright law and may only be used in connectionwith the FLS 106 scanner. This user manual may not be used for any other purpose without theprior written approval of Langer EMV-Technik GmbH.
