- 46 / 79 -LANGEREMV-TechnikDE-01728 Bannewitzmail@langer-emv.dewww.langer-emv.de FLS 106 IC set / FLS 106 PCB setConnecting a Computer14.6Use a USB 2.0 type A/B cable (fully rated, Hi speed, maximum length of 2 meters) to connect thescanner to a computer. Connect the USB type A plug to the PC and the USB type B plug to theUSB type B port (Figure 50) on the FLS 106 scanner's control panel.Figure 50: Connecting the USB type B plug to the scanner's USB type B portConnecting a Measuring Device for Near-Field Scans by Taking a14.7Spectrum Analyzer as an ExampleTo connect a spectrum analyzer to the FLS 106 scanner, one end of the corresponding measuringcable is connected to the spectrum analyzer's RF input and the other end (SMA plug) to the"RF out" SMA connector on the FLS 106 control panel (Figure 51).Figure 51: Connecting the measuring cable with SMA plug to the scanner's "RF out" portPlease refer to the annex of the ChipScan-Scanner software user manual or the www.langer-emv.de website for a list of measuring devices supported by the ChipScan-Scanner software 1.1 www.langer-emv.com/fileadmin/ChipScan-ESA%20Supported%20Spectrum%20Analyzers.pdf
