- 53 / 79 -LANGEREMV-TechnikDE-01728 Bannewitzmail@langer-emv.dewww.langer-emv.de FLS 106 IC set / FLS 106 PCB setFastening the Device Under Test16Fastening a Device Under Test With the Clamping Pieces16.1Fasten the clamping pieces with the hexagon socket screws M6 (hexagon socket 5 mm) and theT-nuts in the selected T-slots.The clamping pieces' angle and height can be changed with the grub screws M8 (hexagon socket4 mm).Note: Scratches and/or other traces may be left on the T-slot table if the clamping pieces arefastened too tight, fasten the screw only hand-tight.Process:Insert the first T-nut into the desired T-slot and move to the desired position.Figure 59: Inserting the T-nut into the T-slotThen place the clamping piece above the T-nut and secure loosely with the hexagon socketscrew M6.Figure 60: Fastening the clamping piece with thehexagon socket screw on the T-slot plateFigure 61: Adjusting the height and angle of the clampingpiece with the grub screws
