- 65 / 79 -LANGEREMV-TechnikDE-01728 Bannewitzmail@langer-emv.dewww.langer-emv.de FLS 106 IC set / FLS 106 PCB setInstalling a Near-Field Probe with the SH 01 Probe18HolderInstalling a Near-Field Probe on the FLS 106 IC18.1First connect one end of the SSMB-SSMB cable to the SSMB connector of the rotary unit and laythe cable on the rotary unit's rotary ring as shown in Figure 87.Figure 87: SSMB-SSMB cable connected to the rotaryunit's connecting plug for collision controlFigure 88: SSMB-SSMB cable properly laidNow mount the SH 01 probe holder on the rotary unit's rotary ring using the knurled screws M3(Figure 89).Connect the free end of the SSMB-SSMB cable to the SSMB connector of the SH 01 probe holder(Figure 90).Figure 89: SH 01 in the mounted state Figure 90: SSMB-SSMB cable connected to the SH 01
