- 35 / 79 -LANGEREMV-TechnikDE-01728 Bannewitzmail@langer-emv.dewww.langer-emv.de FLS 106 IC set / FLS 106 PCB setDelivery11The FLS 106 scanner is delivered in a customised transport box. The scanner itself weighs 75 kg.The transport box's dimensions and weight may vary depending on the equipment and place ofdestination. Therefore, the total weight cannot be provided here.Due to its high weight, the transport box should always be transported with a pallet truck or fork-lifttruck.Acceptance Inspection11.1The packaging must be inspected for any damage incurred during transport on receipt of thegoods. Any visible transport damage should be noted in the forwarder's shipping documents.Please contact the supplier immediately if there are problems in this respect. Defects can only be claimed within the complaints period.Storage11.2Observe the following points when storing the transport box including the scanner, devices andaccessories:- Store the box in a dry place.- Only store the box in closed rooms.- Store the box on a safe, level surface.- Store the box on the correct side (do not tilt).- Do not stack the box on another box and do not stack anything on top of the transport box.Incorrect storage may damage the FLS 106 scanner, devices and/or accessories.Opening the Transport Box11.3Ensure that the transport box is placed on level ground. Use appropriate tools to open the transportbox and prevent damage to the equipment. Do not break open the box by brute force.When unpacking the box, carry out a thorough check that the consignment is complete on thebasis of the scope of delivery and that it has not been damaged during transport. Defects can only be claimed within the complaints period.Packaging11.4The packaging should prevent any damage during transport, corrosion and other damage.Therefore, it should only be removed shortly before the set-up. Dispose of the packaging materialin compliance with the disposal regulations applicable at the place of installation.Note: We recommend that the packaging material for the attachments be put aside to ensure thatthe FLS 106 attachments and accessories can be stored safely.
