Page 268 of 906 NT5D33 and NT5D34 Lineside E1 Interface cards553-3001-211 Standard 3.00 August 2005When dip switch #1, positions 2 and 8 are set to “Table,” AB Bits areconfigured by the user through the Set Mode MMI command (see “Set Mode”on page 295). Otherwise, the signaling scheme selected by dip switch 1,positions 2 and 8 will be used.IPE Shelf address for LEI See Table 98 3456See Table 98 OFFOFFOFFOFFCard type for ringerallocationXTI = 19XMLC = 1877ONOFFOFFE1 signaling See Table 97 8 OFF OFFTable 97LEI card – signaling-type dip switch settingsSwitch #1Characteristic Selection Position 2 Position 8Signaling Type Loop start OFF OFFGround start ON OFFAustralian P2 OFF ONTable ON ONTable 96LEI card – Switch #1 dip switch settings (Part 2 of 2)Characteristic SelectionSwitchPositionSwitchSettingFactoryDefault
