OHAUS Ranger 7000 Instruction Manual

Also see for ranger 7000: Instruction manual Instruction manual Quick start guide Instruction manual Instruction manual

Contents

OHAUS Ranger 7000 Instruction Manual Manual pdf 17 page image

RANGER®7000 SCALES EN-15The Weighing sub-menu is now displayed.Select the list item and press the button corresponding tothe icon to change the setting as desired.4.2 CountingUse this application to count samples of uniform weight.CountingPress the button until Counting is displayed in the upper left portion of the home screen.The default (or last) Average Piece Weight (APW) is displayed.Setup APW value according to section 4.2.1 and then place objects on the pan to display the number of pieces.The COUNTING Home screenMain Display LineReference FieldsFunctionsApplicationIconNote: Refer section 9.5, or press the button for button icon explanation.4.2.1 Set the Average Piece Weight (APW)Note: It is recommended that the APW is larger than 1d. If APWis between 0.05d and 1d, a warning screen will be displayed andthe information line will show ‘Low APW’. If APW is less than0.05d an error screen will appear and the APW value cannot bestored.There are three ways to set the APW:1. Positive SamplingPlace the sample on the pan and then key in the number ofpieces using the alphanumerical keypad and press the buttoncorresponding to the icon to confirm.Alternatively, press the button corresponding to theicon. A numeric input screen appears.Key in the desired number of pieces using the alphanumericalkeypad, and then press the button corresponding to theicon . .The display returns to the Home screen.www. .com information@itm.com1.800.561.8187