OHAUS Ranger 7000 Instruction Manual

Also see for ranger 7000: Instruction manual Instruction manual Quick start guide Instruction manual Instruction manual

Contents

OHAUS Ranger 7000 Instruction Manual Manual pdf 51 page image

RANGER®7000 SCALES EN-495.5.2 StabilitySet the amount the reading can vary while the stability symbol remains on.0.5 Division = 0.5 graduations1 Division = 1 graduation2 Division = 2 graduations5 Division = 5 graduationsNote: The setting is forced and locked to 1 Division when the Security Switchis set to the locked position.5.5.3 Zero RangeSet the percentage of scale capacity that may be zeroed.2%10%Note: The setting is forced and locked to 2% when the Security Switch isset to the locked position.5.5.4 Filter levelSet the amount of signal filtering.LOW = faster stabilization time with less stability.MEDIUM = normal stabilization time with normal stability.HIGH = slower stabilization time with more stability.Note: The setting is at the current setting when the Security Switch is set tothe locked position.5.5.5 Auto Zero TrackingSet the automatic zero tracking functionality.OFF = disabled.0.5 Division = display maintains zero up to a drift of 0.5 graduationper second1 Division = display maintains zero up to a drift of 1 graduationper second.3 Division = display maintains zero up to a drift of 3 graduationsper second.Note: The setting is forced and locked to 0.5 Division when the Security Switch is set tothe locked position.5.5.6 BrightnessSet the display brightness using the numerical keypad.20…80…1005.5.7 Auto Dim (minutes)Set whether the display dims after x seconds/minutes.OFF = disabled.1…30 (minutes)5.5.8 Auto Sleep (minutes)Set whether the display enters sleep mode after x seconds/minutes.OFF = disabled.1…100 (minutes)www. .com information@itm.com1.800.561.8187