OHAUS Ranger 7000 Instruction Manual

Also see for ranger 7000: Instruction manual Instruction manual Quick start guide Instruction manual Instruction manual

Contents

OHAUS Ranger 7000 Instruction Manual Manual pdf 26 page image

EN-24 RANGER®7000 SCALESPress the button corresponding to the icon toconfirm the weight for the current component and tocontinue adding other components.Notes: To terminate the formulation process, press thebutton corresponding to the icon. If the addedweight is over the tolerance limit, compensation will beperformed according to the setup in the configuration (Atthe end, Off, Immediately).When the compensation is active (At the end orImmediately), if the component added is within tolerancethe capacity bar is always in green color.If one component added is outside the tolerance, the scalewill do compensation for next items. In this case, the valuedisplayed is not actual weight and the capacity bar will turnred.To finish the formulation, press the button corresponding tothe icon and add the last component.Then the formulation will finish and a Formulation Resultscreen is displayed.To print the formulation result press the button corresponding to the icon or the button .To save the formulation result, press the button corresponding to the icon .To return to the main screen, press the button corresponding to the icon .4.4.2 Recipe FormulationMake sure the formulation mode is set to recipe (seesection 4.4.4 for instructions).The information line will now show ‘Please recall a recipe’Recall a recipe from the Formulation Library by pressingthe button . See section 4.10 for instructions onhow to create/recall a Library record.www. .com information@itm.com1.800.561.8187