OHAUS Ranger 7000 Instruction Manual

Also see for ranger 7000: Instruction manual Instruction manual Quick start guide Instruction manual Instruction manual

Contents

OHAUS Ranger 7000 Instruction Manual Manual pdf 59 page image

RANGER®7000 SCALES EN-575.9.15 Edit StringUp to 10 Strings can be edited using the alphanumerical keypad.5.9.16 Data TransferOutput weighing results directly to a PC application. Setup is easy and no additional software isrequired.Note: Data Transfer Function is not supported in Windows® 7/8. OHAUS provides SPDC software forWindows 7/8 users.OFF = do not print.ON = print the specified settings.Click the Start Menu in Windows XP system and click “Settings” –>open Control Panel.Double click Accessibility Options in Control Panel.Select the General tab inAccessibility Options.Check Use Serial Keys, and click the Settings button.Select the Serial Port, and set the Baud rate to 9600.After selecting, click OK to close setting for serial keys.Close the Control Panel.Run Excel® to open one blank sheet. Click on the cell where the data is to be placed.At this time, if the scale sends data to the PC through the RS232 port, the data will be put into thecell, and the cursor will automatically move to the next vertical cell.Note: If the weighing value is a negative number, set the target cell in TEXT format. Otherwise,Excel will not distinguish it as a negative number.www. .com information@itm.com1.800.561.8187