OHAUS Ranger 7000 Instruction Manual

Also see for ranger 7000: Instruction manual Instruction manual Quick start guide Instruction manual Instruction manual

Contents

OHAUS Ranger 7000 Instruction Manual Manual pdf 67 page image

RANGER®7000 SCALES EN-65Command FunctionLEVEL 2 C2 Calibrate with the external calibration weightC3 Calibrate with the internal calibration weightI10 Inquire or set scale IDI11 Inquire of scale typeP100 Print out on the printerP101 Print out stable weight valueP102 Print out current weight value immediatelySIRU Send weight value in the current unit immediately and repeatSIU Send weight value in the current unit immediatelySNR Send stable weight value and repeat after every weight changeSNRU Send stable weight value in the current unit and repeat after every weight changeSRU Send weight value in the current unit and repeatST After pressing the Transfer key, send the stable weight valueSU Send stable weight value in the current unitLEVEL 3 LST Send menu settingsM01 Weighing modeM02 Stability settingM03 Autozero functionM19 Send calibration weightM21 Inquire/set weight unitP Print textPRN Print out at every printer interfaceRST RestartSFIR Send weight value immediately and repeat quicklySIH Send weight value immediately in high resolutionSWU Switch weight unitSX Send stable data recordSXI Send data record immediatelySXIR Send data record immediately and repeatU Switch weight unit6.2 RS232 InterfaceRS232 (DB9) Pin Connections:Pin 2: Scale transmit line (TxD)Pin 3: Scale receive line (RxD)Pin 5: Ground signal (GND)Pin 7: Clear to send (hardware handshake) (CTS)Pin 8: Request to send (hardware handshake) (RTS)Use the built-in RS-232 Port to connect either to a computer or a printer.www. .com information@itm.com1.800.561.8187