OHAUS Ranger 7000 Instruction Manual

Also see for ranger 7000: Instruction manual Instruction manual Quick start guide Instruction manual Instruction manual

Contents

OHAUS Ranger 7000 Instruction Manual Manual pdf 54 page image

EN-52 RANGER®7000 SCALES5.9 CommunicationEnter this menu to define external communication methods and to set printing parameters.Data may be output to either a printer or PC (see section 6.5 for output string).Factory default settings are shown in bold.Communication Sub-menuRS232 USBChoosing an item brings up another menu level (RS232 shown):Configuration Print SetupChoosing an item brings up yet another menu level, the device settings are dependent onthe COM chosen (RS232 shown).Configuration Menu: (RS232 shown)5.9.1 ResetResets the settings to factory default settings. Reset the settings to factory defaultsettings.5.9.2 Baud RateSet the baud rate (bits per second).3006001200240048009600192005.9.3 ParitySet the data bits and parity.7 EVEN = 7 data bits, even parity7 ODD = 7 data bits, odd parity7 NONE = 7 data bits, no parity8 NONE = 8 data bits, no parity5.9.4 Stop BitsSet the stop bits.1 BIT2 BIT5.9.5 HandshakeSet the flow control method.NONE = no handshakingXON/XOFF = XON/XOFF handshakingHARDWARE = hardware handshaking (COM1 menu only)5.9.6 Alternate CommandEnter this sub-menu to set a different command character for the P (Print), T(Tare) orZ(Zero)www. .com information@itm.com1.800.561.8187