OHAUS Ranger 7000 Instruction Manual

Also see for ranger 7000: Instruction manual Instruction manual Quick start guide Instruction manual Instruction manual

Contents

OHAUS Ranger 7000 Instruction Manual Manual pdf 35 page image

RANGER®7000 SCALES EN-334.7.2 Average Time SetupPress the button corresponding to the icon toenter the Edit Average Time screen.The Edit Average Time screen is now displayed.Enter the Average Time by using thealphanumerical keypad and press the buttoncorresponding to the icon to changesave the value and return to the Application homescreen.The default Average Time is 10 s.Note: When the time is set to 0, the first stable weight over5d will be displayed.Averaging time can be set to a value between 0 and60.4.7.3 Input/Output (I/O) SetupThe I/O’s can be customized for various user preferences.The I/O’s are defined below (defaults in Bold).Item Available SettingsDiscrete Input 1 Off, Zero, Tare, Clear Tare, Print, Start, ResetDiscrete Input 2 Off, Zero, Tare, Clear Tare, Print, Start, ResetDiscrete Output 1 Off, Underload, OverloadDiscrete Output 2 Off, Underload, OverloadDiscrete Output 3 Off, Underload, OverloadDiscrete Output 4 Off, Underload, OverloadNote: The I/O’s will only work when the I/O Option Board have been installed. See the Accessory list in section 9.4for information. The option I/O board provides two isolated inputs and four dry-contact normally open relay outputswhich can be used for simple process weighing.Press the button to enter the Main Menu.With the button corresponding to the icon, go downthe list and highlight Application Mode. Enter this sub-menuby pressing the button corresponding to the icon.www. .com information@itm.com1.800.561.8187