OHAUS Ranger 7000 Instruction Manual

Also see for ranger 7000: Instruction manual Instruction manual Quick start guide Instruction manual Instruction manual

Contents

OHAUS Ranger 7000 Instruction Manual Manual pdf 33 page image

RANGER®7000 SCALES EN-31Note:The output will be reset to normally open when both SP1 and SP2 are reached.The I/O’s will only work when the I/O Option Board have been installed. See the Accessory list in section 9.4 forinformation. The option I/O board provides two isolated inputs and four dry-contact normally open relay outputswhich can be used for simple process weighing.The outputs also only work when the button corresponding to the icon has been pressed.Press the button to enter the Main Menu.With the button corresponding to the icon, go downthe list and highlight Application Mode. Enter this sub-menuby pressing the button corresponding to the icon.In the Application Mode menu enter the Fillingsub-menu.The Filling sub-menu is now displayed.Select the list item and press the button corresponding to theicon to change the setting as desired.4.7 Dynamic WeighingUse this application to weigh an unstable load, such as a moving animal. Three different start/reset modes can beselected: Manual (start and stop via key press), Semi-Automatic (auto-start with manual reset), and Automatic(start and stop automatically).Press the button until Dynamic is displayed in the upper left portion of the home screen.Press the button corresponding to the icon to start averaging.To abort the averaging press the button corresponding to the icon .When the averaging has finished, press the button corresponding to the icon to reset.www. .com information@itm.com1.800.561.8187