OHAUS Ranger 7000 Instruction Manual

Also see for ranger 7000: Instruction manual Instruction manual Quick start guide Instruction manual Instruction manual

Contents

OHAUS Ranger 7000 Instruction Manual Manual pdf 50 page image

EN-48 RANGER®7000 SCALESExample 2:In this example the barcode rule is set to ‘…..55’. This means that any barcodethat is 7 characters long and ending with the numbers ‘55’ will be accepted by thescale.Note: The barcode rule is only functional when connecting a barcode scanner through theUSB host.Since there are many brands of Barcode scanners in the market, OHAUS tested andconfirmed that below Barcode scanners from Datalogic are compatible with Ranger7000:Heron seriesQuickScan seriesGryphon 4100 seriesGryphon 4400 seriesHoneywell barcode scanner can also be supported by following below steps:1. Make sure the barcode scanner is set as USB PC KeyboardSetup Barcode scanner as USB PC Keyboard according to the barcode scanner’s manual.USB PC Keyboard2. Make sure the barcode scanner is set with a carriage return after the bar code according tothe barcode scanner’s manual.Add CR SuffixPlease refer to the barcode scanner manual for supported barcode types.The barcode will be stored as PN (Part Number) in the library. The maximum length of thebarcode (PN) is 30 characters.5.5 5.5 Read OutEnter this sub-menu to customize Scale display functionality.Scale Read Out sub-menuReset Stability Zero Range Filter LevelAuto ZeroTrackingBrightness Auto Dim(minutes)Auto Sleep(minutes)Factory default settings are shown below in bold.5.5.1 ResetReset all settings to factory default settings.Yes = Reset.No = Do not reset and return to Read Out menu screen.www. .com information@itm.com1.800.561.8187