OHAUS Ranger 7000 Instruction Manual

Also see for ranger 7000: Instruction manual Instruction manual Quick start guide Instruction manual Instruction manual

Contents

OHAUS Ranger 7000 Instruction Manual Manual pdf 23 page image

RANGER®7000 SCALES EN-214.3.3 Application SetupThe Application can be customized for various user preferences.Press the button corresponding to the icon to enterConfiguration Setup.The Configuration Menu is now displayed.Select the list item and press the button correspondingto ,to change the setting as desired.To return to the Application home screen, press thebutton corresponding to .The Check Configurations are defined below (defaults in Bold).Item Available Settings CommentsCheck Mode Check Weighing, Check Counting To set ModeAudible Signal Off, Under,Accept,Over, Under&Over To enable Beeper SignalAuto Opt* On, Off To enable Automatic Optimization of APWAPW Auto Save* On, Off To enable APW Automatic saveOpt. Beep* On, Off To enable Optimization BeepAuto Tare On, Off, On Accept To enable Automatic Tare‘On Accept’ means that if the object weightis within accept range, auto Tare will beperformedChain Tare On, Off To enable Chain (Continuous) TareAccumulate Off, Automatic, Manual, On Accept To enable Accumulation / Totalization‘On Accept’ means that if the object weightis within accept range, auto Accumulate willbe performed.Graph Display Bar, Block To set Graph Display TypeNote: * Only available in Check Counting mode.Positive CheckPositive check is used to determine when the material added to the scale is within the target range. In this case theUNDER and OVER limits must be positive values. (The OVER limit must be greater than or equal to the UNDERlimit.)Negative CheckNegative check is used to determine when the material removed from the scale is within the target range. In thiscase the UNDER and OVER limits are both negative values.The UNDER limit must be greater than or equal to the OVER limit (for example: UNDER= -10/OVER= -15).Place the item to be weighed on the scale and press Tare.Remove a portion of the item until it is within the ACCEPT range.www. .com information@itm.com1.800.561.8187