OHAUS Ranger 7000 Instruction Manual

Also see for ranger 7000: Instruction manual Instruction manual Quick start guide Instruction manual Instruction manual

Contents

OHAUS Ranger 7000 Instruction Manual Manual pdf 43 page image

RANGER®7000 SCALES EN-414.11 LibraryWhen an item is processed on a regular basis, the item’s data may be stored in memory for future use. Thismemory is referred to as the Scale’s Library.The following data is stored for the Application used:Application PN(Part Number) Name PresetTare APW Ref./TargetWeightCheckLimitsSP(Set Points)Sieve SizeCalculate FMMaxRecordsWeighing x x x 2000Counting x x x x 2000Percent N/A xCheck x x x x x 2000Dynamic N/A xFilling x x x x x 2000Formulation x x x x 30Differential N/A xDensity N/A xSieve x x 30Notes: Maximum length of PN and Name is 30 characters.For the Formulation library, each record can store up to 100 components.For the Sieve library, each record can store up to 10 sizes.4.11.1 Creating a Library RecordTo create a Library record, press the Library button . The requested data records will appear according tothe active application mode (see section 4.10 above). In this example the Weighing Library screen is nowdisplayed.To return to the previous screen press the Library buttonagain.To add a Library record, press the button corresponding tothe icon .The New Library Item screen is displayedPress the button corresponding to the icon toenter PN by using the alphanumeric keypad.Press the button corresponding to the icon againto save the Barcode.Repeat the process to enter Name, Tare Weight and othervalues by using the button corresponding to tomove down in the list.Press the button corresponding to the icon to go back to Library List screen.www. .com information@itm.com1.800.561.8187