OHAUS Ranger 7000 Instruction Manual

Also see for ranger 7000: Instruction manual Instruction manual Quick start guide Instruction manual Instruction manual

Contents

OHAUS Ranger 7000 Instruction Manual Manual pdf 6 page image

EN-4 RANGER®7000 SCALES1. INTRODUCTION1.1 DescriptionThe Ranger 7000 scale is a precision weighing instrument that will provide you with years of service if properlycared for. The Ohaus Ranger 7000 scales are available in capacities from 3000 grams to 60 kilograms.1.2 FeaturesModular Design: Ohaus Ranger 7000 scales are composed of two interconnected modules: a Terminal and aBase. Depending on the user’s needs, the unit can be operated with the Terminal either attached to, or remotefrom, the Base, with a single interconnect cord 2 meter long. An optional tower kit and extended cord are alsoavailable as accessories.1.3 Definition of Signal Warnings and SymbolsSafety notes are marked with signal words and warning symbols. These show safety issues and warnings. Ignoringthe safety notes may lead to personal injury, damage to the instrument, malfunctions and false results.Signal WordsWARNING for a hazardous situation with medium risk, possibly resulting in injuries or death if notavoided.CAUTION for a hazardous situation with low risk, resulting in damage to the device orthe property or in loss of data, or injuries if not avoided.Attention For important information about the productNote For useful information about the productWarning SymbolsGeneral Hazard Electrical Shock HazardAlternating Current Information1.4 Safety PrecautionsCaution: Read all safety warnings before installing, making connections, or servicing thisequipment. Failure to comply with these warnings could result in personal injury and/orproperty damage. Retain all instructions for future reference. Verify that the input voltage range printed on the data label and the plug type matches the local AC powerto be used. Only connect models supplied with a grounded power cord to a compatible grounded power receptacle. Do not position the scale such that it is difficult to disconnect the power cord from the power receptacle. Make sure that the power cord does not pose a potential obstacle or tripping hazard. This scale is for indoor use only. Use the scale in dry locations only. Do not drop loads on the pan. Use only approved accessories and peripherals. Operate the equipment only under ambient conditions specified in these instructions. Disconnect the equipment from the power supply when cleaning. Do not operate the equipment in hazardous or unstable environments. Service should only be performed by authorized personnel.www. .com information@itm.com1.800.561.8187