EN-72 RANGER®7000 SCALES9. TECHNICAL DATA9.1 SpecificationsAmbient conditions Indoor use only Altitude: Up to 2000 m Specified Temperature range: 10 °C to 30 °C (R71MHD3/6/15/35 models)-10 °C to 40 °C (R71MD3/6/15/35 models) Humidity: maximum relative humidity 80 % for temperatures up to 30 °Cdecreasing linearly to 50 % relative humidity at 40 °C Mains supply voltage fluctuations: up to ±10 % of the nominal voltage Installation category II Pollution degree: 2 Operability is assured at ambient temperatures between 5 °C to 40 °C.Materials Base Housing; die-cast Aluminum, Painted Terminal housing: die-cast Aluminum, Painted Weighing Pan: 304 Stainless SteelTABLE 9-1. SPECIFICATIONSMODEL R71MHD3 R71MHD6 R71MHD15 R71MHD35Capacity 3000 g 6000 g 15000 g 35000 gReadability d 0.01 g 0.02 g 0.1 g 0.1 gApproved Readability e 0.1 g 0.2 g 1 g 1 gRepeatability (std. dev.) ± 2 d ± 2 d ± 2 d ± 2 dLinearity ± 2 d ± 2 d ± 2 d ± 2 dWeighing units gram, kilogram, ounce, pound, pound:ounce, custom unitApplications Weighing, Parts Counting, Percent Weighing, Check Weighing, DynamicWeighing, Filling, Formulation, Differential Weighing, Density, SieveStabilization time (typical) Within 1 secondSafe overload protection 150 % of CapacityDisplay TFT Graphic LCDDisplay size 4.3 inchBacklight White LEDCommunication RS-232, USBPower supply Power Input: 100-240 V~ 0.5 A 50/60 HzApproval class IIPlatform size 240 x 240 mm 377 x 311 mm9.4 x 9.4 inch 14.8 x 12.2 inchTerminal Housingdimensions (W x D x H)267 x 118 x 72 mm10.5 x 4.6 x 2.8 inchBase Housing dimensions 280 x 280 x 114 mm 377 x 311 x 128 mm(W x D x H) 11 x 11 x 4.5 inch 14.9 x 12.2 x 5 inchAssembled dimensions 280 x 420 x 114 mm 377 x 467 x 128 mm(W x D x H) 11 x 16.5 x 4.5 inch 14.9 x 18.4 x 5 inchNet weight 7.2 kg / 16 lb 10.9 kg / 24 lbShipping weight 9.2 kg / 20.3 lb 14.4 kg / 31.7 lbShipping dimension 605 x 405 x 244 mm23.8 x 15.9 x 9.6 inch665 x 525 x 330 mm26.2 x 20.7 x 13 inchwww. .com information@itm.com1.800.561.8187