SPECIAL MODES5-35Margin shiftThe margin shift function will automatically shift the text or image on the copy paper approximately 1/2" (10 mm) inits initial setting.This function is convenient when stapling or binding copies with a string.1 Touch the [MARGIN SHIFT] key on thespecial modes screen.The margin shift settingscreen will appear.The margin shift icon( ) will also appear inthe upper left of thescreen to indicate thatthe function is turned on.2 Select the shift direction.Touch a shift directionkey to select right or left.The selected key will behighlighted.3 Set the shift amount as needed and touchthe [OK] key.Use the and thekeys to set the shiftamount. The shiftamount can be set from0" to 1" in 1/8" (0 to 20mm in 1 mm)increments.4 Touch the [OK] key on the special modesscreen.You will return to the main screen of copy mode.NOTES The initial setting for the margin width can be changed in the key operator programs to any value from 0 to 1"(0 to 20 mm). (Page 15 of the Key operator's guide) When margin shift is selected, rotating copying will not operate even if the condition for rotate copying is met.Image shiftedto the right Image shiftedto the leftMarginMarginOriginalTwo-sided copyingImage shiftedto the rightMarginImage shiftedto the leftMarginOrOne-sided copyingOriginalThe shift direction can be selected from right or leftshift as shown in the illustration.To display the special modes screen...See "General procedure for using specialfunctions" on page 5-2.SPECIAL MODESMARGIN SHIFTPAMPHLET COPYERASEJOBBUILDRIGHT LEFTAbout the steps that followIf an automatic document feeder is being used,see pages 4-7 through 4-10. If the documentglass is being used, see pages 4-11 through 4-13.To cancel the margin shift function, touch the[CANCEL] key on the margin shift setting screen.SIDE 1(0 1)inch (0 1)inchSIDE 2OKCANCELOK1/2 1/2
