LOADING PAPER2-72Programming and editing paper typesTo program or edit the name of a paper type or set paper attributes, follow the steps below.1 Follow steps 1 and 2 of "Setting the papertype and paper size" (page 2-5)2 Touch the [PAPER TYPE REGISTRATION]key.3 Select the paper type that you wish toprogram or edit.4 Touch the [TYPE NAME] key.A character entry screenappears.Enter a type name(maximum of 14characters). (See page7-26 to enter characters.)5 Set the attributes of the paper tray.Touch the checkboxesto the left of the items toselect them.6 Touch the [EXIT] key to exit theprogramming/editing procedure.OKPAPER TYPE REGISTRATIONCUSTOM SETTINGSTRAY 2 TYPE/SIZE SETTINGUSER TYPE 1USER TYPE 5 USER TYPE 6 USEUSER TYPE 2 USESELECT THE PAPER TYPEFIXED PAPER SIDETYPE NAMEPAPER TYPE REGISTRATIONNo.01USER TYPE 1DISABLE STAPLEDISABDISABFIXED PAPER SIDETYPE NAMEPAPER TYPE REGISTRATIONNo.01USER TYPE 1DISABLE STAPLEDISABDISAB"FIXED PAPER SIDE" : Select when paper is to beloaded print side down in thetray. Make sure a checkmarkdoes not appear when paper isto be loaded print side up.• If the two-sided function isprohibited in "DISABLING OFDUPLEX" in the key operatorprograms (page 11 of the Keyoperator’s guide), do not usethis setting."DISABLE DUPLEX" : Prohibits two-sided printing.Enable when the back side ofthe paper cannot be printed on."DISABLE STAPLE" : Prohibits stapling. Enablewhen using special paperssuch as transparency film andlabel sheets."DISABLE PUNCH" : Prohibits punching. Enablewhen using special paperssuch as transparency film andlabel sheets.NOTE"FIXED PAPER SIDE" and "DISABLE DUPLEX"cannot be simultaneously enabled.DISABLE DUPLEXDISABLE PUNCHEXITCANCEL
