REDUCTION/ENLARGEMENT/ZOOM4-16Manual selection (preset copy ratios/zoom)Preset ratios (maximum 400%, minimum 25%) can be selected with the enlargement and reduction keys. In addition,the zoom keys can be used to select any ratio from 25% to 400% in increments of 1%.ratios and two additional reduction ratios.>1 Place the original in the document feedertray or on the document glass. (pages 4-3to 4-6)2 Touch the [COPY RATIO] key.3 Use the [MENU] key to select menu " " ormenu " " for copy ratio selection.MenuA.Preset reduction copy ratios are:77% and 64% (for the inch system).70%, 81% and 86% (for the AB system).B.Preset enlargement copy ratios are:121% and 129% (for the inch system).115%, 122% and 141% (for the AB system).MenuA.Preset reduction copy ratios are:50% and 25%.B.Preset enlargement copy ratios are:200% and 400%.(The custom ratios set by the key operator appearin ratio menu 2.)4 Use the reduction, enlargement, and[ZOOM] keys on the touch panel to set thedesired copy ratio.Zoom ratios: Any ratiofrom 25% to 400% canbe set in 1% increments.Touch the [ ] key toincrease the ratio, or the[ ] key to decreasethe ratio. (If you continueto touch the [ ]/[ ] key, the ratio will changeautomatically. After 3 seconds, the ratio willchange rapidly.)5 Touch the [OK] key.NOTEWhen the original is placed in the document feeder,the ratio can be set from 25% to 200%.UTO100%8 X11/2PAPER SELECTCOPY RATIOAUTOAUTOAUTO 8 x11ORIGINALPAPER SELECTCOPY RATIOAUTOIMAGEEXPOSURE0XY ZOOM MENUZOOMREADY TO SCAN FOR COPY.OK1/2AUTOAUTOAUTO 8 x11ORIGINALPAPER SELECTCOPY RATIOAUTOIMAGEEXPOSURE0XY ZOOMOKMENUZOOM1/2NOTES Touch a reduction or enlargement key to set theapproximate ratio, then touch the [ ] key toincrease the ratio or the [ ] key to decrease theratio. Automatic changing of the ratio when a zoom keyis continuously touched can be disabled in the keyoperator programs (see "Key operation setting(prohibit key repeat)" on page 10 of the keyoperator’s guide). If the message "IMAGE IS LARGER THAN COPYPAPER." appears when a ratio is selected, theimage may not fit on the copy paper. To set the horizontal and vertical copy ratiosseparately, use the XY ZOOM feature. See page4-18.XY ZOOM MENUZOOMXY ZOOM MENUZOOM64AUTOAUTOAUTO 8 x11ORIGINALPAPER SELECTCOPY RATIOAUTOIMAGEEXPOSURE0IOOK1/2
