MISFEED REMOVAL2-18Misfeed in the transport area, fusing area, and exit area1 Unlatch the duplex module and slide it tothe left.Unlatch the module andgently move the moduleaway from the machine.If the machine is notequipped with a duplexmodule, open the sidecover similarly.2 Remove the misfed paper as shown in theillustrations below.If paper is misfed in thetransport area, turn rollerrotating knob A in thedirection of the arrow toremove the misfedpaper.oIf paper is misfed in thefusing area, turn rollerrotating knob B in thedirection of the arrow toremove the misfedpaper.If the misfed paper isinside the fusing area,turn down the fusing unitopen tab to open thefusing unit and removethe misfed paper.If paper is misfed in theexit area, remove it asshown while taking carenot to tear the paper.If the duplex module isequipped with an exittray and paper is misfedin the exit area, removethe misfed paper asshown in the illustration.3 Gently close the duplex module.If the machine is notequipped with a duplexmodule, close the sidecover.After closing, confirmthat the misfeedmessage is cleared andthe normal displayappears.CAUTIONThe fusing unit is hot. Take care in removing paper.(Do not touch the metal parts.)NOTEDo not touch ordamage the transferroller.Do not touch ordamage thephotoconductivedrum.Roller rotating knob ATransfer rollerPhotoconductive drumCAUTIONThe fusing unit is hot. Take care in removing paper.(Do not touch any metal parts.)Roller rotating knob BFusing unit open tab
