SPECIAL MODES5-22Transparency film with insert sheetsWhen copying onto transparency film, blank insert sheets can be placed between transparent sheets. This function only operates in "one-sided to one-sided" and "two-sided to one-sided" modes. Multiple copies cannot be selected in this mode. The inserts are inserted under each transparencyas shown at left. Select insert paper that is the same size as thetransparencies. Transparencies can be fed from the tray 2 orbypass tray. If the transparencies are loaded in tray 2, be sureto set the paper size and paper type as explainedon pages 2-5 and 2-6.1 Load transparency film into the tray 2.Remove any paperalready in the tray 2before loading thetransparency film. (Toload paper in the tray 2,see pages 2-6 and 2-7.)2 Press the [CUSTOM SETTINGS] key.The custom settingsmenu screen willappear.3 Touch the [PAPER TRAY SETTINGS] key.The paper tray selectionscreen will appear.4 Touch the [TRAY SETTINGS] key.5 Touch the key to display the traysettings screen of tray 2.6 Touch the [TYPE/SIZE] key.7 Touch the [TRANSPARENCY] key.8 Touch the [OK] key.If the paper size was changed from an AB size to aninch size, or from an inch size to an AB size, be sureto set the paper type and size as explained on steps5 to 6 on page 2-5 and steps 7 to 10 on page 2-6.Insert sheetsExample: Inserting insert sheets between transparenciesOriginals (1-sided)Originals (2-sided)Two-sided originals are onlysupported when automaticdocument feeder is used.Inserts can also becopied on.PAPER TRAYSETTINGSTAORWARDRINTPRINTERCONDITIONCUSTOM SETTINGSPAPER TRAY SETTINGSTRAY SETTINGS1/4PLAIN / 8 x11OKPRINTPAPER TRAY SETTINGSTYPE / SIZECUSTOM SETTINGSTRAY 1FAX I-FAXCOPY DOC.FILINGFIXED PAPER SIDEDISABLE DUPLEXDISABLE STAPLEDISABLE PUNCH1/2TYPE / SIZETRAY 2PER TRAY SETTINGSPRINT COPY I-FAX DOC.FILINGFAXPLAIN / 8 x111/2HEAVY PAPERTYPE.LETTER HEADLABELSPRE-PUNCHEDCOLOR TRANSPARENCYTYPE OKSIZEAUTO-INCHAUTO-ABSIZE INPUT8 X11,8 X11RA4,A4R,B5,B5RJAPANESE P/CX420 Y297SETTING1/2 1/2NON STANDARDSIZE 2/2
