4-74NORMAL COPYINGThis section describes the normal copying procedure.Making copies with the automatic document feeder 1-sided copies of 1-sided originals1 Place the originals in the document feedertray. (pages 4-3 to 4-6)2 Make sure that the 1-sided to 1-sided copymode is selected.The one-sided to one-sided mode is selectedwhen no icon for a two-sided mode appears inthe dashed area on thedisplay. If the 1-sided to1-sided copy mode isalready selected, steps 3 to 5 are not needed.3 Touch the [2-SIDED COPY] key.4 Touch the [1-sided to 1-sided copy] key.Touch the [1-sided to 1-sided copy] key.5 Touch the [OK] key.6 Make sure that paper of the same size asthe originals is automatically selected*.The selected tray will behighlighted or themessage "LOAD xxxxxxPAPER." will appear. Ifthe message appears,load paper in a papertray with paper of therequired size.Even if the message above appears, copying canbe performed onto the currently selected paper.*The following requirements must be satisfied.Originals of a standard size (11" x 17", 8-1/2" x14", 8-1/2" x 11", 8-1/2" x 11"R or 5-1/2" x 8-1/2R"(A3, B4, A4, A4R, B5, B5R or A5)) are set and theauto paper select function is enabled.If originals of a size otherthan the sizes above areto be copied, manuallyselect the desired papersize by touching the[PAPER SELECT] keyand then touching thedesired paper size selection key.The selected key will be highlighted and the paperselection screen will close. To close the paperselection screen without making a selection, touchthe [PAPER SELECT] key.Original CopyORIGINAL 8 x111/28 x111/28 x111/28 x111/211x178 x11R1/2SPECIAL MODES2-SIDED COPYOUTPUTOK0UTOAUTO100%8 x11PAPER SELECTOEXPOSURE1/2READY TO SCAN FOR COPY.8 x111/2PLAIN1. 8 x111/22. 11x173. 11x174. 8 x111/2PLAINPLAINPLAINPLAIN
