Oce im4511 Operation Manual

Also see for im3511: Programming Date & Time Facsimile operation manual Operation manual Operating manual Operator's guide

Contents

Oce im4511 Operation Manual Manual pdf 7 page image

0-3CAUTIONS1.Do not touch the photoconductive drum. Scratches or smudges on thedrum will cause dirty prints.2.The fusing unit is extremely hot. Exercise care in this area.3.Do not look directly at the light source. Doing so may damage youreyes.4.Five adjusters are provided on all optional stand/paper drawer units.These adjusters should be lowered until they contact the floor.When moving the machine with the optional stand/paper drawer, besure to raise the adjusters. Also, unlock the two casters at the front ofthe optional stand/paper drawer. After moving the machine, lower thefour adjusters until they reach the floor and lock the two casters.5.Do not make any modifications to this machine. Doing so may result inpersonal injury or damage to the machine.6.Since this machine is heavy, it is recommended that it be moved bymore than one person to prevent injury.7.When connecting this machine to a computer, be sure to first turn boththe computer and the machine off.8.Do not make copies of anything which is prohibited from copying bylaw. The following items are normally prohibited from printing bynational law. Other items may be prohibited by local law. Money Stamps Bonds Stocks Bank drafts Checks Passports Driver's licensesSome models include the document filing function, which stores document image data on the machine’s hard disk.Stored documents can be called up and printed or transmitted as needed. If a hard disk failure occurs, it will nolonger be possible to call up the stored document data. To prevent the loss of important documents in the unlikelyevent of a hard disk failure, keep the originals of important documents or store the original data elsewhere.With the exception of instances provided for by law, Imagistics bears no responsibility for any damages or loss dueto the loss of stored document data."BATTERY DISPOSAL"THIS PRODUCT CONTAINS A LITHIUM PRIMARY MEMORY BACK-UP BATTERY THAT MUST BEDISPOSED OF PROPERLY. PLEASE CONTACT IMAGISTICS TECHNICAL SUPPORT FOR ASSISTANCE INDISPOSING OF THIS BATTERY.This product utilizes tin-lead solder, and a fluorescent lamp containing a small amount of mercury.Disposal of these materials may be regulated due to environmental considerations.For disposal or recycling information, please contact your local authorities or the Electronics Industries Alliance:www.eia.orgFusing unitAdjusterLock Release