Oce im4511 Operation Manual

Also see for im3511: Programming Date & Time Facsimile operation manual Operation manual Operating manual Operator's guide

Contents

Oce im4511 Operation Manual Manual pdf 57 page image

DUPLEX MODULE3-33Loading paper in the bypass trayThe bypass tray can be used for plain paper and special paper including labels. Up to 100 sheets of standard papercan be set. For paper types that can be used in the bypass tray, refer to page 2-3.1 Open the bypass tray.When setting 11"x 17",8-1/2" x 14", 8-1/2" x 13,A3 or B4 paper, be sureto extend the bypasstray extension.If the bypass trayextension is not pulledall the way out the size ofthe loaded paper will notbe correctly displayed.2 Set the bypass tray paper guides to thewidth of the paper to be used.3 Insert the paper all the way into the bypasstray.Set the paper facedown. If there is aclearance between thepaper and the paperguides, the paper maynot be fed correctly.Adjust the guides so thatthey contact the edgesof the paper.4 Set the type and size of the loaded paper.When the paper system is changed from the inchsystem to the AB system or vise versa or when thepaper type is changed, the paper type must bedesignated. For setting the paper type and papersize, see page 2-5.5 Loading paper in the bypass tray is nowcomplete.NOTEIf the paper type or size is changed, be sure to enter the paper type and size as in step 4.Bypass tray extensionNOTES When using 5-1/2" x 8-1/2" paper, A5 paper orpostcards, be sure to load them with their shorter edgeinto the feed slot as shown in the illustration. When loading plain paper other than Imagisticsstandard paper, special media other than postcards,Imagistics-recommended transparency film, or paperto be printed on the back, the paper must be loadedone sheet at a time. Loading more than one sheet at atime will cause misfeeds. When adding paper, remove any paper remaining inthe tray, combine it with the paper to be added, andreload as a single stack. Do not use paper that has already been printed on bya plain paper fax machine or a laser printer. This maycause printed images to become dirty. Do not use paper that has already been printed on bya thermal transfer or inkjet printer. In particular, paperthat has been printed on by a thermal transfer printer(such as a word processor that uses a cassette) maycause missing characters and smudges. When printing on transparency film, be sure to removeeach sheet as it exits the machine. Allowing sheets tostack in the output tray may cause curling. Please use Imagistics-recommended transparencyfilm. Place the film in the bypass tray so that it isoriented vertically with the label side face up. If thelabel side is placed face down, smudging may result. When loading multiple sheets of transparency film in the bypasstray, be sure to fan the sheets several times before loading.Label facing up