SPECIAL MODES5-26Card shotWhen copying a card, this function allows you to combine the front and back sides on a single sheet of paper.This function is convenient for making copies for certification purposes and helps save paper. Copying is only possible on standard size paper. A copy ratio cannot be selected when using thisfunction. The image cannot be rotated when using thisfunction.1 Touch the [PAPER SELECT] key and thenselect the desired paper size.The selected paper sizekey is highlighted andthe paper selectionscreen closes.2 Touch the [CARD SHOT] key in the specialmodes screen (2nd screen).The CARD SHOTsetting screen willappear. A card shoticon ( , etc.) will alsoappear in the upper leftcorner of the screen toindicate that thefunction is turned on.3 Enter the X dimension (width) and Ydimension (length) of the original with thekeys.X (width) is initially selected. Enter X and thentouch the Y ( ) key to enter Y.To return the X and Y values to the initialsettings configured in the key operatorprograms, touch the [SIZE RESET] key.("CARD SHOT SETTINGS" on page 15 of thekey operator's guide).To have the images enlarged or reduced by asuitable ratio based on the entered originalsize so that the front and back sides fit into theselected paper size, touch the [FIT TO PAGE]key.OriginalExample:Portrait8-1/2" x 11" (A4)sizeExample:Landscape8-1/2" x 11" (A4)sizeCopyBack ofcardFront ofcardCARD CARDCARDNOTEIf paper of the desired size is not loaded in any tray,load paper of the required size in a paper tray or thebypass tray. (See "Setting the paper type and papersize" on page 2-5.)To display the special modes screen...See "General procedure for using specialfunctions" on page 5-2.READY TO SCAN FOR COPY.8 x111/2PLAIN1. 8 x111/22. 11x173. 11x174. 8 x111/2PLAINPLAINPLAINPLAINTRANSPARENCYINSERTS MULTI SHOTMIRRORIMAGECARD SHOTSIZE RESETCANCEL OKFIT TOPAGE
