2-172MISFEED REMOVALWhen a misfeed has occurred during printing, the message "A MISFEED HAS OCCURRED". will appear in the touchpanel display of the operation panel and printing including copying and facsimile output will stop. The approximatemisfeed locations are indicated with " " shown in the illustration below. The page numbers for detailed informationon misfeed removal are also shown.Misfeed removal guidanceMisfeed removal guidance can be displayed by touching the [INFORMATION] key on the touch panel after a misfeedhas occurred.Misfeed in the transport area, fusingarea, and exit area (page 2-18)Misfeed in the mail-binstacker (page 3-6)Misfeed in paper tray 1 (page 2-20)Misfeed in the multi purpose drawer(page 2-21)Misfeed in the stand/MPD & 2000sheet paper drawer (page 2-21)Misfeed in the stand/3 x 500 sheetpaper drawer (page 2-21)Misfeed in the document feeder (page 2-22)Misfeed in the finisher (page 3-12)Misfeed in the duplex module(page 2-19)Misfeed in the bypass tray (page 2-19)Misfeed in the saddlestitch finisher (page3-22)Misfeed in themulti purposedrawer (page2-21)NOTEPrinting is not possible when a misfeed occurs, and thus any faxes or Internet faxes received at this time will betemporarily held in memory. The faxes will print out automatically as soon as the misfeed is cleared.NOTES Do not damage or touch the photoconductivedrum. (See page 2-18.) Be careful not to tear the misfed paper duringremoval. lf paper is accidentally torn during removal, besure to remove all pieces.Fusing unitCAUTIONThe fusing unit is hot. Takecare in removing paper.INFORMATION
