0-2Improper installation may damage this product. Please note the following during initial installation and whenever themachine is moved.1.The machine should be installed near anaccessible power outlet for easy connection.2.Be sure to connect the power cord only to apower outlet that meets the specified voltage andcurrent requirements. Also make certain theoutlet is properly grounded.For the power supply requirements, see thename plate on the back of the main unit.3.Do not install your machine in areas that are:damp, humid, or very dustyexposed to direct sunlightpoorly ventilatedsubject to extreme temperature or humiditychanges, e.g., near an air conditioner orheater.4.Be sure to allow the required space around themachine for servicing and proper ventilation.A small amount of ozone is produced within the machine during operation. The emission level is insufficient tocause any health hazard.NOTE:The present recommended long term exposure limit for ozone is 0.1 ppm (0.2 mg/m3) calculated as an 8 hr. time-weighted average concentration.However, since the small amount that is emitted may have an objectionable odor, it is advisable to place the copierin a ventilated area.23-5/8"(60cm)31-1/2"(80cm)11-13/16" (30cm)23-5/8" (60cm)INSTALLATION REQUIREMENTS
