REDUCTION/ENLARGEMENT/ZOOM4-18XY ZOOMThe XY ZOOM feature allows the horizontal and vertical copy ratios to be changed separately. The ratios can setfrom 25% to 400% in increments of 1%.Example: Selecting 100% for the length and 50% for the width1 Place the original in the document feedertray or on the document glass. (pages 4-3to 4-6)2 Touch the [COPY RATIO] key.3 Touch the [XY ZOOM] key.4 Touch the [X] key.The initial state of the [X]key is selected(highlighted), so thisstep normally is notnecessary. Touch the[X] key only if it is nothighlighted yet.5 Use the reduction, enlargement, andZOOM ([ ], [ ]) keys to change thecopy ratio in the horizontal (X) direction.A fixed ratio key will notbecome highlightedwhen touched.Zoom ratios: Any ratiofrom 25% to 400% canbe set in 1% increments.Touch the [ ] key toincrease the ratio, or the[ ] key to decreasethe ratio. (If you continueto touch the [ ]/[ ] key, the ratio will changeautomatically. After 3 seconds, the ratio willchange rapidly.)6 Touch the [Y] key.Original CopyNOTEWhen the original is placed in the document feeder,the ratio can be set from 25% to 200%.UTO100%4PAPER SELECTCOPY RATIOXY ZOOM MENUZOOM100100YXNOTES Touch a reduction or enlargement key to set theapproximate ratio, then touch the [ ] key toincrease the ratio or the [ ] key to decrease theratio. Automatic changing of the ratio when a zoom keyis continuously touched can be disabled in the keyoperator programs (see "Key operation setting(prohibit key repeat)” on page 10 of the keyoperator’s guide).XY ZOOMZOOM50%10Y64%ZOOM50100YXZOOM50100YX
