TEMPLATES- 197 -21345676 Press the button for the desired template.To switch the menuPress or .Templates with the automatic start function enabled canbe identified with . If this mark is displayed, you canpress it to immediately start the operation of the functionsset in the template.7 Key in the password for the selectedtemplate. (If no password is set, go to step8.)1) Press [PASSWORD] and then enter the passwordwith the buttons on the touch panel or the digitalkeys on the control panel.2) Press [OK].8 Confirm that “Updated the templatesetting” is displayed on the touch panel.The message is displayed for approx. 3 seconds.9 Select other copy modes as required, andthen press the [START] button on thecontrol panel.Changing DataYou can change the data of templates or private groups thatare already registered, such as the template name, user name,password and setting of the automatic start function.Note• The data of the public template group can be changed fromthe TopAccess menu but this cannot be done from thecontrol panel. For how to change them from the TopAccessmenu, refer to the TopAccess Guide.Changing private group data1 In the template menu, select the desiredgroup.1) Press the [REGISTRATION] tab.2) Select the desired group by pressing its button orkeying in its group number (3 digits).3) Press [EDIT].To switch the menuPress or .2 Key in the password for the selected group.(If no password is set, go to step 3.)1) Press [PASSWORD] and then enter the passwordwith the buttons on the touch panel or the digitalkeys on the control panel.2) Press [OK].
