EDITING FUNCTIONS- 95 -2134567Omit Blank PageYou can remove blank sheets included in the scanned originalsbefore copying is started. This function is called “omit blankpage”.Note• This function may not properly detect blank sheets includedin the following types of originals:- Half-tone originals- Originals including sheets almost blank (e.g. blank pageshaving only page numbers)• If you copy 2-sided originals including blank sheets to 2-sided copy while this function is enabled, the front and backsides of the originals and the copies will not match.Memo• The sensitivity to detect blank pages can be changed. Fordetails, refer to the "Setting Items/Printing" ( P.211).1 Place paper in the tray(s).When using bypass copying, be sure to set the papersize.2 Place the original(s).3 Press [OMIT BLANK PAGE] on the EDITmenu.4 Press [OK].Omit blank page is now set.5 Select other copy modes as required, andthen press the [START] button on thecontrol panel.Scanning and copying start. A message notifying you ofthe number of the blank sheets appears for approx. 5seconds.1 35 61 35 6
