SETTING ITEMS (ADMIN)- 280 -21345674 Press [YES], and wait until the setting isreflected.Setting up the Ad Hoc ModeThe wireless settings can be operated from the Control Panelof this equipment.When setting up the equipment for the wireless network in theInfrastructure Mode, follow the steps below.1. Select the network type P.271 "Select network type"2. Specify the SSID P.272 "Specify SSID"3. Select the security mode P.273 "Select security mode" Select network typeFirst access the WIRELESS SETTING screen from the ADMINmenu from the Touch Panel Display to select the network typefor the wireless network.Note• If you are not sure what network type to select, see thefollowing section to determine the network type first.1 Press [SETTING] button on the controlpanel to enter the SETTING menu.2 Press [ADMIN].The ADMINISTRATOR PASSWORD screen is displayed.3 Press [PASSWORD].The input screen is displayed.4 Enter the administrator password andpress [OK].The ADMIN menu is displayed.5 Press [WIRELESS SETTING].The WIRELESS SETTING menu is displayed.6 Press [WIRELESS SETTING].The WIRELESS SETTING screen is displayed.7 Press [ON] and press [NEXT].The NETWORK TYPE screen is displayed.
