EDITING FUNCTIONS- 87 -21345677 Select other copy modes as required, andthen press the [START] button on thecontrol panel.When the originals are placed on the RADF, scanningand copying start.When they are placed on the document glass, followsteps 8 and 9.8 Place the next original, and then press[NEXT COPY] on the touch panel or the[START] button on the control panel.Scanning of the next original starts. Repeat thisprocedure until the scanning of all the originals is finished.9 When the scanning of all the originals isfinished, press [JOB FINISH] on the touchpanel.Copying starts.Sheet InsertionYou can insert a special type of paper such as colored paper atthe desired page. This function is called “sheet insertion”. Youcan insert up to 2 types of sheets for a total of 50 pages. Thesheet insertion mode has the following 2 types:COPIED: Inserts a copied sheet, replacing the specified page.BLANK: Inserts a blank sheet before the specified page.1 Place sheets for sheet insertion.Place them on the multi-purpose tray or in a traypreviously set for insertion sheets. The paper for theinsertion sheets must be placed in a different papersource than normal paper.Note• When placing paper in a tray for sheet insertion, besure to select “INSERT 1” or “INSERT 2” as a papertype, and also set the paper size and thickness.• When placing paper on the multi-purpose tray, be sureto set the paper size and thickness. Basic Guide• Place the paper for insertion sheets of the same sizeas normal paper in the same direction.2 Place the normal paper in the tray(s).3 Place the original(s).When placing them on the document glass, they must beplaced from the first page.4 Press [SHEET INSERTION] on the EDITmenu.REPORT200312344 3REPORT200323REPORT20032 1
