|Handbook 111• If the fax was transmitted from memory (not directly fromthe feeder), a portion of the first page prints after thereport. If you do not want this portion of the first page toprint, set User Function 04, Image in MCF, OFF. Refer tothe “Setting Basic Features, User Function Settings”section of this handbook.How to PrintYou can set your fax machine to print a message confirmationreport after every transmission (automatic) or you can print areport only when you want to (manual).Automatic PrintoutFollow this procedure to set your fax machine to print amessage confirmation report after every transmission.1 Press the Select Function key.2 Press the 9/User Program One Touch key.The display shows1:FUNC. PROGRAMMING.Message Confirmation Report (MCF)What is it?This report provides information about your last single-location fax transmission or polling transmission.What information does it provide?• The date of the communication.• The total amount of time spent Sending or Receiving (S,R-TIME).• The Location ID or telephone number of the fax machineyou were communicating with (DISTANT STATION ID).• The communication mode used (Communication Codes).• The number of pages sent or received.• The result of the communication (Results Codes)• Service codes. Be sure to report these diagnostic codes ifyou contact your Authorized Service Dealer aboutcommunication problems.
